Posted by Randy On Long Island [172.56.23.52] on Saturday, October 31, 2015 at 02:26:33 :
In Reply to: Re: Spacer Clarfication posted by CSCameron [71.223.220.155] on Saturday, October 31, 2015 at 00:24:59 :
The thickness of the spacer is equal to, or slightly greater than, the length of the wheel lugs so as not to protrude past the "new" wheel mounting face....and yes, more than 1/2". Back to square one? But wouldn't using one standard wheel and one dually wheel with 1/2" spacer between also require an additional spacer behind the inner wheel to clear the rotor, or did already factor that in?....."and the beat goes on".
I never gave too much thought about the 8' max. and the legality of it all.