Posted by clueless [186.15.45.20] on Wednesday, October 28, 2015 at 22:59:29 :
In Reply to: Re: Another picture of the rims posted by CSCameron [71.223.220.155] on Wednesday, October 28, 2015 at 20:43:44 :
the load is already way out there on the end of the spindle with an outer dually even more so and with a spacer worse
most trucks that run duals have the wheel flange further back on the hub for more support
one could use half ton hubs and drums(11 in.) then the inner would be further in and easily clear the drum
or come up with a disc set up that works with the half ton hub and clears the valve stem which i think dual piston calipers do but yet to mock it up