Posted by Willy-N [72.171.192.61] on Tuesday, October 27, 2015 at 02:04:51 :
Got them in yesterday. The Military smaller mount will slip inside the channel on the door jam. Then I drilled thru the jam to the threaded nuts mounted on the bracket and used grade #8 bolts to thread into them. If you look close you can see the 2 bolts inside the door gap. The head liner will go over this and you then need to make a hole in it for the bolt to go thru into the mount. The lower reel is bolted into the cab mounts and stays clean looking when off. The other haft of the belt has a cable in it to keep it in place between the top and bottom of the seat.
Follow Ups: