Posted by Willy-N [72.171.192.60] on Thursday, October 01, 2015 at 21:20:07 :
In Reply to: Re: Cab is Sitting on the Frame Now. Pict posted by Clint Dixon [74.206.62.210] on Thursday, October 01, 2015 at 20:06:37 :
OK Now I got the frame ones right so the hole is forward on the angle bracket. Then the other ones went right on and the fenders sat into them. Those were a pain to re/bolt but I did it. Pulled the blocks out of the rear of the cab and it looks like I could use a taller blocks than 1 1/2" 2x4s. My brake pedal just hits the cab a little plus I need to loosen the steering box and bring up the column some. I will wait for that tomorrow I am beat! At least the cab fits now on the fenders and does not touch the frame. The 2 bolts on the transfer case go into the holes in the floor centered.
Follow Ups: