Posted by Glen of Idaho [70.41.244.80] on Monday, September 14, 2015 at 21:25:55 :
In Reply to: Wet Sanding Question? The Water?? posted by Willy-N [72.171.192.59] on Monday, September 14, 2015 at 15:54:54 :
Put a few drops of dove liquid soap per gallon of water helps reduce the surface tension so you can clean the sandpaper.
Are you using a long board for the sanding? If you are getting into the bondo it was too high anyway don't worry about the water it is a polyurethane base compatible with the two part primer. wipe the area with a clean cloth and cleaner degreaser and look down the panel at an angle while it is still wet whit a light shining , that will give you an idea how straight you are getting it.
Follow Ups: