Posted by Willy-N [72.171.192.118] on Wednesday, September 02, 2015 at 12:21:02 :
In Reply to: Re: Bed Cylinders Mounted and Work! Pict posted by Glen of Idaho [70.41.244.80] on Wednesday, September 02, 2015 at 11:03:53 :
I got what you mean on the bushing inside. On the Rod End Mount There is a cross member and a section of 4" channel welded to it the rod bolt goes thru. I also will weld a plate on the side drilled for this bolt. The bolt is not that tight it would crush the wall. The rod will float just a little at this end.