Posted by Desoto61 [138.162.0.42] on Tuesday, September 01, 2015 at 11:58:35 :
In Reply to: Re: Door pillar fix posted by Don in NH [216.107.193.154] on Tuesday, September 01, 2015 at 10:06:19 :
Yes, the manual actually talks about slamming the door on a 2x4 to get it aligned correctly. I had quite a few repetitions of getting the door on, removing it and tweaking the hinge forward or aft and then re-hanging and trying again. Add in the in/out/up/down and it can get tedious.
Once you do get it locked down I drilled a tiny hole through the outer metal and the hinge, so I could use it as an alignment hole when it was time to re-hang the door.