Posted by Willy-N [72.171.192.59] on Thursday, August 27, 2015 at 20:45:04 :
In Reply to: Re:1 1/8" Pillow Bearing Specs posted by Daryl in Oz [210.50.215.60] on Thursday, August 27, 2015 at 18:24:14 :
Figured out the mounts for the base of the cylinder. It will sit inside 4" wide Channel steel 3/8" thick with 2- 12" X 2 1/2" angle iron bolted top and bottom to the frame the channel welds to. I will add a 6" x 12" plate behind it bolted into the top of the frame. I will bolt the parts on tack it and remove it to weld it all together. I don't want the dump frame welded to the PWs frame. This bolts on at the cross member behind the cab.