Posted by ed [186.15.41.97] on Saturday, August 22, 2015 at 21:55:59 :
In Reply to: FFPW Dual Rims posted by Jim in ct [70.215.10.109] on Saturday, August 22, 2015 at 16:46:22 :
the deep dish is real hard to find
but moving 4 rims out the 1 1/2 in. as in my pic is the easiest and safest
all you have to do then is have a machine shop cut the ear of the drum od down a hair
when he cuts it have him cut at an angle tapering the same as the wheel and you will only have to past the 1/8 in lip on the drum a hair
this also makes it easier to mount the wheel as the drum now pretty much centers the wheel--just make sure they are not touching each other when all snugged up
my guess is 1/32 plus clearance between drum and wheel is good
Follow Ups:
