Posted by Dean [208.93.180.75] on Wednesday, August 12, 2015 at 18:42:32 :
In Reply to: Huh? Ends of hoses are the same a double flare w/ nuts posted by Chris Case [108.225.237.77] on Wednesday, August 12, 2015 at 17:39:45 :
The parts manual shows two different part numbers for the brass connection, two for the front and two for the rear.
The flex hoses I got from DC Truck has double flare threads inside the large end, and 7/16 NF male threads at the other end. This works well for the front, but with no flex hose at the rear it doesn't work due to the fact that steel line with double flare is connected directly into the brass connection and the threads are wrong.
I used the one correct connection for the rear and have everything now properly connected except for second rear brake. I need a second brass fitting as shown on the left in the picture above, or I need to modify the connection to include a flex line.
I anyone knows what I am saying and has a rear brass connection, I would appreciate it.
Dean
Follow Ups: