Posted by Bruce in BC [24.207.105.85] on Monday, June 29, 2015 at 21:30:50 :
just attempted to put the passenger door on my Carryall. I need to bend the hinge because it is binding before the door is fully closed. The piece of the hinge that connects to the body is rolled. This creates a seam and there are two oil holes drilled in the seam. Out or in? I was thinking the seam would fit in, or face the door. What way did they do it at the factory. Stupid doors, I went and used button heads in an attempt to get the head height as small as possible. They are still a tad high. This is a problem with these trucks and leads to stress cracks around the hinge area. I want to avoid that issue.
Follow Ups: