Posted by clueless [201.237.45.94] on Wednesday, May 13, 2015 at 19:18:42 :
In Reply to: Rivet removal posted by Dan (NH) [173.9.49.14] on Wednesday, May 13, 2015 at 15:13:17 :
where i reinforced it with 3/16 s channel little taller than the stock frame and bolted it back up
i just drilled a sm hole thru to make sure i was close to center and then drilled again with consequtive larger size bits then i knocked the head off with a cold chisel and drove em out
pc of cake---lol