Posted by clueless [201.237.44.50] on Monday, April 06, 2015 at 18:00:54 :
In Reply to: Both are excellent, just stay to heck away from Heim joints. posted by Chris Case [108.225.237.33] on Monday, April 06, 2015 at 16:49:07 :
thnx
looking at drilling a tapered hole in the stock knucle arm closer to the knuckle 5 in or so from the knuckle center mount the box just inside the front hanger and put ff tie rod ends on on each end of a 10 in. or so tie rod threaded for said tie rods
seems that this would even be stronger than the stock steering as drag link won t be so far from the knucle
this way i would not ruin the arm it would just have a hole in it--unless i was to cut off the ball but there is no need to
might look funny but leaves room for more than one option