Posted by Milo in pa [71.116.20.116] on Saturday, March 28, 2015 at 20:59:29 :
Got the box mounted I cut some off one ear of the box. There is about 1/16 inch room from box to frame. And I ground a little off the top of the box mount and a spot on the bottom for a bolt head that holds a brake line clip then drilled 2 holes for the bolts that hold the frame bracket. I used a pipe wrench to bend the lip up and it seems to fit good it was easier than I thought. I took the dip stick out to take the picture so it can be seen better
Follow Ups: