Posted by wayneh [69.250.202.50] on Monday, March 02, 2015 at 20:19:27 :
In Reply to: Re: Transfer case questions posted by Kirk ct [66.212.203.173] on Monday, March 02, 2015 at 20:02:58 :
That is an NP200 yes. And you can put the hole thing together backwards... Trust me I know.... So pay attention to the goes into and the goes out ofs....
Now if leaky transfer cases are ok with you don't read further... But if you don't want leaks put speedi sleaves on the input and output shafts. And... Make sure the shift rods are not pitted. M Series Rebuild sells stainless steel ones that will never pit. And watch out... some of those pesky bearings could fall out!!!!!
Wayne
Follow Ups: