Posted by Sunny and warm coast Bruce [24.207.104.104] on Monday, March 02, 2015 at 15:16:05 :
In Reply to: Re: Window guide question posted by scott 56 [24.130.235.145] on Monday, March 02, 2015 at 14:51:14 :
there are for holes to the left in you photo. As well as two tabs that bend in. The piece i have rests against the two tabs and the 1/4 inch bolts go through those four holes. It tapers, I think the small end goes near the window opening and the bottom goes towards the door bottom, i am not sure and wanted advice from someone who knows- which ain't me.
thanks again
Bruce