Posted by Willy-N [72.171.192.117] on Sunday, March 01, 2015 at 00:06:19 :
In Reply to: damn willy we be in the same boat posted by clueless [186.15.41.85] on Saturday, February 28, 2015 at 22:29:14 :
I did some more reading on the subject. If I understand it right with the back end a little higher the Negative Caster goes up. Stock is 0-3 degs? Some say -5 is better for going strait. 0 degs for off road easy to turn tires but not good for higher speeds. I have not figured the angle yet but the frame is long and makes less of a difference. It should have made the front end more Negative and make it harder to steer not moving. Can be corrected with a simple axle shim for the few degs if it is needed. Glad you brought it up to me. Something to keep in mind with the new tires on and all the body metal in place to set the springs minimum load. Add in some load factors changing things for the better and see how close it is. Might still be in specs or real close but not the bad way, it then could still use a shim for correction.
Follow Ups: