Posted by Desoto61 [138.162.0.43] on Tuesday, January 20, 2015 at 13:29:21 :
In Reply to: Re: Stuck clutch posted by Paul(in NY) [12.64.186.139] on Tuesday, January 20, 2015 at 12:36:11 :
I have a GM slave, which actually does have a bleed port on the top of it. A small hex screw port near the inlet on the end with a weep hole. Had a nice clean stream of fluid from it when I sealed it.
Can't be certain about the bearing, but the clutch assembly is for that year transmission, and I didn't go for a heavy duty clutch specifically so I didn't have a super heavy clutch peddle. Figured if it was originally for a 454 then it should be fine for a 3.9.
The peddle is really heavy, it could be the clutch itself, but while I do have some movement at the fork, it's not much (< 1"), and with a slave that long I was expecting more throw.
Follow Ups: