Posted by Ron in PA [72.95.253.179] on Thursday, January 08, 2015 at 19:14:34 :
In Reply to: best PW engine swap posted by mikey stone [71.39.211.46] on Monday, January 05, 2015 at 10:19:24 :
I read about one build,(I believe mentioned above) that used a steel Chevy pattern aftermarket bell housing.This moved the starter to the right side for more clearance and being steel the were able to weld motor mount brackets to the bell.This was used in addition to a standard Hemi-Chevy adapter plate.I'm not sure what transmission was used though.
RT