Posted by scott 56 [24.130.235.145] on Tuesday, December 16, 2014 at 12:36:51 :
In Reply to: Re: first start oil pressure posted by Dan H [70.211.141.108] on Tuesday, December 16, 2014 at 10:58:38 :
yes and no. I replaced all the bearings but did not have the crank and cam reground or replace pistons. I am doing the "Rich Okie" rebuild as opposed to the "poor Okie: or poor man's rebuild that Don in NH did. I already have a oil gauge hooked up. need to get a new amp gauge also then I can test my various original oil and amp gauges.