Posted by daveyKin Pa [108.36.132.204] on Thursday, November 13, 2014 at 17:48:01 :
In Reply to: Re: Outer u joint at the wheel posted by daveyKin Pa [108.36.132.204] on Thursday, November 13, 2014 at 17:43:16 :
also, to disassemble we would lay the joint across the vise jaws with the cap to come out pointing up and then hammer down on the shaft.
only pushing one cap at a time and doesn't squeeze the yoke. if to tight use the same set-up in a press pushing one cap at a time.
Follow Ups: