Posted by CSCameron [174.26.88.71] on Wednesday, November 12, 2014 at 19:26:51 :
In Reply to: Re: Steering Problem Update... posted by Will (in IL) [69.136.10.43] on Wednesday, November 12, 2014 at 18:38:15 :
The doors are off now but were on when we finished welding. I had a problem with the passenger door hitting the drip rail ever since I purchased the truck. I fixed it at that time. Everything worked as it should when I removed the cab for sandblasting right after all the welding.
I can't see anything wrong with the cab. When I sight across the cab from front door post to front door post, the dash is perfectly aligned. No bow, warp, or twist. The accelerator rod sticks right through the center of the hole in the floor board. The starter pedal aligns perfectly with the starter.
I am going to put the doors back on tomorrow to see if I can get them to line back up.