Posted by Ed C. on Monday, July 30, 2001 at 1:23PM :
In Reply to: What is best way to loosen lug nuts? posted by Dave on Monday, July 30, 2001 at 11:45AM :
I would try a 3/4" breaker bar & socket (or larger - even 1"), as the 1/2" may be too small and break. If the 3/4" bar won't budge it, even after a 3' or longer pipe is added for leverage, then you may want to invest in a 4:1 torgue multiplier. I picked up a used one on ebay for $50 a couple of years back and it sure has come in handy for these situations! Continue to use vibration while attempting to loosen the nuts. A tap or two with a heavy hammer while trying to loosen them helps if the threads are contaminated and contributing to the binding. I have often wondered if a 3/4 or 1" air wrench would work (600ftlbs?) but never had a compressor large enough or enough mad money to find out! I guess maybe a "real" mechanic can help on this one. Good Luck!
|
Follow Ups:
This board is powered by the Mr. Fong Device from Cyberarmy.com |