Posted by JD on Monday, July 23, 2001 at 10:18PM :
In Reply to: Cleaning Engine for Painting posted by Paul on Monday, July 23, 2001 at 9:52PM :
I don't think blasting will be nessessary. When I did my motor out of the 48 (extreme mud/crud/grease/rust) I first hit it with a pressure wash with degreaser while still in the truck to find the bolts. this cleaned it really well. I wire brushed it with a drill, then wiped with carb cleaner & primed. I never used any media beside aluminum oxide in my cabinet or sand in portable, but I think cost would be of concern. good luck, John
|
Follow Ups:
This board is powered by the Mr. Fong Device from Cyberarmy.com |