The American Bosch motor requires two holes

Posted by Eric B. [99.100.188.129] on Thursday, October 23, 2014 at 15:08:35 :

In Reply to: Re: Which brand/model motor are you using? posted by Dave [75.81.241.240] on Thursday, October 23, 2014 at 15:00:51 :

The factory vacuum hole is used for the stabilizing screw and you need to drill another hole above the vacuum hole for the main shaft.

Put some copper behind the hole you drilled and weld it back up. Then drill out the small hole again and drill the larger one above.

Eric

Follow Ups:

• Re: The American Bosch motor requires two holes - Dave 22:02:42 10/25/2014
• Here is a picture of the factory holes for the electric wiper - Eric B. 15:14:31 10/23/2014
  • The ones that Tom showed work, but they are not factory - Eric 15:23:05 10/23/2014
    • Re: The ones that Tom showed work, but they are not factory - Dave 19:45:34 10/23/2014
      • If you have the American Bosch motor without the Dodge front - Eric B. 22:15:07 10/23/2014

Post a Followup