Timing between intake and exhaust?

Posted by Chriscase [108.247.158.98] on Wednesday, September 24, 2014 at 09:09:38 :

In Reply to: So, the cam was the problem? posted by gmharris [71.105.33.223] on Tuesday, September 23, 2014 at 22:26:26 :

The lifters are at a different angle. by ummm 20 degrees. So that valve timing is off by 20 degrees.

Each valve is closed for about 250 degrees, so compression is OK.

I think. ;^)

• http://imageevent.com/bigchriscase/casebrothersfurnituremaking

Follow Ups:

• Re: Timing between intake and exhaust? Makes sense - Bob Perry 09:24:39 09/24/2014

Post a Followup