Posted by Vaughn [99.14.86.43] on Monday, September 15, 2014 at 21:46:31 :
In Reply to: Engine repair advice needed posted by Kirk ct [66.212.203.173] on Monday, September 15, 2014 at 19:35:08 :
Early 40's Chrysler 251 C.I.D. engine if pistons are 3-7/16ths dia. If the block checks out good, I would have it sleeved back to std. When you go too far out on bore, you'll have engine heating issues and there is nothing you can do to cool it. Beyond that, standard rebuild using chrome rings.