Posted by don in nh [216.107.193.155] on Monday, September 15, 2014 at 11:47:39 :
In Reply to: Limiting the motion linits halfs coming apart. posted by Chris Case [107.194.23.183] on Monday, September 15, 2014 at 10:45:03 :
(This is a WC 1/2t)
Jay - In the manual it says that you shim the thrust button (little washers around the pin) to control the play. I didn't notice before I pulled it apart, but perhaps there was a lot of play. The shimmed button on the other side is probably about 1/2".
Wouldn't want it bouncing around in there.
Thanks,
don
Follow Ups: