Posted by Vaughn [99.14.87.69] on Thursday, August 28, 2014 at 21:17:55 :
In Reply to: NP200 to NP205 switch posted by Bob H [64.124.192.194] on Thursday, August 28, 2014 at 07:47:56 :
As others have said, they run fairly hot. Four things will cause the leakage:
1. Loose bearings,
2. No gasket sealer at the end of the yokes. This prevents oil from passing out the splines,
3 Worn yoke seal surface.
4. Bad seal