Needs a special puller, or make one.

[Follow Ups] [Post Followup] [Dodge Power Wagon Forum]

Posted by Chris Case [108.225.238.157] on Wednesday, July 09, 2014 at 23:05:48 :

In Reply to: steeringwheel removal posted by Jim [75.107.102.22] on Wednesday, July 09, 2014 at 22:06:43 :

Use a piece of pipe cut into two half tubes. About 3" long. Diameter has to be big enough to fit over column, but into recess in back side of wheel. Then I use chain type vise grips to clamp the two halves around the column, and a conventional two jaw gear puller.

There are some on eBay form time to time, and somebody here will usually loan you one for the shipping charges. But I prefer not to wait indefinitely.

Follow Ups:

Re: Needs a special puller, or make one. - Greg Coffin 23:34:41 07/09/2014

Re: Needs a special puller, or make one. - Doc Dave 06:14:35 07/10/2014
- Re: Needs a special puller, or make one. - Greg Coffin 22:28:38 07/10/2014

Post a Followup

Name:
E-Mail:
Subject:
Message:

Optional Link
URL:
Title:
Optional Image Link
URL:

This board is powered by the Mr. Fong Device from Cyberarmy.com