Posted by gmharris [71.105.36.254] on Saturday, July 05, 2014 at 21:58:07 :
In Reply to: Re: Starting problems - 61 WM300 posted by KenW [99.65.177.89] on Saturday, July 05, 2014 at 20:34:28 :
Soldered it? That would be a trick without ruining the lock. Maybe, they epoxied the key in. Either way, you might try heating the key before you break off the key. Then pull out the key with pliers.
Then again, it's just easier to break off the key, especially if the switch is bad.
Follow Ups: