Posted by Desoto61 [138.162.0.44] on Tuesday, June 24, 2014 at 14:36:52 :
In Reply to: Question for Paul (Mr hydroboost) or whomever like to chime posted by Scott Costin Ohio [69.58.115.10] on Tuesday, June 24, 2014 at 13:15:35 :
Went through a few versions to get the right location and angles on mine. Not sure it's the best way but it seems to work in mock-up.
The design allows me to use a waterpump wrench to tighten the nut through the hub. Check out the link below. Should be easier on a V8 as they seem to sit lower in the engine bay. The angle in mine is due to the Size of the Cummins and the length of the hydroboost.