Posted by JAP on Wednesday, July 18, 2001 at 1:04AM :
In Reply to: Re: hydraulic clutch in M37 etc. posted by Chris Lube Lublin on Monday, July 16, 2001 at 0:14AM :
I have a hydraulic setup in my M-56 using the original pedal. I cut and brazed the clevis on the pushrod to allow it to work pointing toward the back of the truck. I drilled the support arm next to the brake master cylinder and mounted a Chrysler clutch master and can still access it thru the floor access plate for the brake master. I have adjustments on the pedal pushrod and on the rod on the slave cylinder (engine is a 225 slant six) Works fine!
Follow Ups:
This board is powered by the Mr. Fong Device from Cyberarmy.com |