Posted by Matt Wilson on Thursday, July 12, 2001 at 8:55PM :
In Reply to: what pto's fit what posted by John S on Wednesday, July 11, 2001 at 7:08PM :
My WWII 3/4-ton WC5* manual (1942 edition) says that the pto in a 3/4-ton was a Detroit Harvester 4100-G. It fits the early flatfender Power Wagon non-synchro New Process transmission. I don't have a model number for these early trannies, but they can be identified by the drain plug that protrudes at an angle, as opposed to the later non-synchros that have a drain plug that sticks out horizontally.
The WC 3/4-ton trucks used the same transmission as the early civilian Power Wagons.
The above PTO has a front output shaft only, unlike the civilian Power Wagon PTO's, which have a rear output shaft as well as the front one.
Matt
This board is powered by the Mr. Fong Device from Cyberarmy.com |