Posted by Gil H. Ingram [75.90.195.32] on Monday, June 02, 2014 at 16:38:36 :
In Reply to: Re: total failure posted by gmharris [71.105.36.254] on Monday, June 02, 2014 at 15:59:02 :
but all were easy to move up and down with no drag at all. Compression test before starting was at 120 to 128 psi except Number 5 which had the bent valve it was zero. Don't know if I can replace valve seats On new engines you can't. Air pressure I used was not under pressure just placed nozzle and blew into manifold don't think enough to lift valve but will try the test that dave told me about
Follow Ups: