Posted by derek [68.122.13.111] on Saturday, May 31, 2014 at 23:27:14 :
In Reply to: Death shimmy update posted by Nick [99.100.212.49] on Friday, May 30, 2014 at 20:56:42 :
Can you feel the death shimmy in the brake pedal? Does the pedal pulse the same as the truck shaking?
My hubs had the measured runout written on them with sharpie.
"You must protect the rotor flange edge from the drift[.] [T]his is easily done by wrapping the area that comes in contact with the flange with a 1/8" layer of duct tape. You may also want to cut a donut out of 1/2" plywood to protect the face of the rotor flange in case you miss the drift when hammering the wheel stud in. The slightest defect in the surface of the rotor flange will cause the rotor to wobble"
Follow Ups: