Posted by Keith in Washington [24.41.55.59] on Saturday, May 17, 2014 at 16:51:32 :
In Reply to: Re: Front Axle Shimmy Problem posted by War Eagle [68.207.207.83] on Saturday, May 17, 2014 at 07:45:08 :
Adjust a little at a time. Do not crank down on the adjustment screw. Test it after each adjustment. Cycle through full steering wheel rotation after each adjustment. There should not be any hard spots to get by. If there is you have adjusted too tight. Adjust when the wheels are pointed straight forward. When done you should have about just over 1/2" of steering wheel movement at top dead center before you see the pitman arm start to move.
Follow Ups: