Posted by Glen of Idaho [70.41.236.36] on Tuesday, April 29, 2014 at 21:56:06 :
In Reply to: Frame Steel Grade on WC ? posted by Alex J [216.54.94.2] on Tuesday, April 29, 2014 at 10:09:17 :
I had some of the 1/8" liners broke up for my PW. I thought cor 10 or A 10 but they insisted on A36 as there wasn't much difference in it. Where it was welded to the existing doubler in the front I used MIG with .045-s-6 and straight co2 running short arc for best penetration, preheat to 400. But hey I am a welder and have made my living at it for 41 years. I still go with " if you don't know what you are doing, do it with 7018 stick".