Posted by dan [108.64.78.167] on Tuesday, April 22, 2014 at 02:21:50 :
In Reply to: Slant 6 crankshaft pulley removal? posted by Sherman in Idaho [72.47.153.28] on Monday, April 21, 2014 at 23:23:02 :
Fer godsake, Sherman, don't throw a regular puller on that. The backing is just thin metal and puller jaws on the edge will tweak it permanently.
The center nut is a big one, unmistakeable.Its either there or its a threaded hole.
Put your socket on a breaker bar and jostle it a bit counterclockwise. It will come free.
Next, use a flat puller two long bolts will go through-(Think this is called a steering wheel puller). Thread into the two holes on the pulley itself.Put a socket or a couple strong washers in the center where the big bolt was to keep from buggering the inner threads. Go easy and it will come off.
Follow Ups: