Posted by Desoto61 [138.162.0.45] on Monday, March 24, 2014 at 07:31:28 :
In Reply to: Re: Time to make more dust. posted by Doc Dave [70.192.219.99] on Monday, March 24, 2014 at 07:03:17 :
They always give recommended air pressure at the tip, but I'm not sure how you're supposed to know that.
I have a feeling my Epoxy primer was that way as it was a little gritty. My first coat of surfacer was light but I went heavier for the later coats. Probably didn't help that I used a different gun for each type and they spray different.
Follow Ups: