Posted by jerryinidaho [64.234.49.226] on Thursday, March 20, 2014 at 20:39:00 :
In Reply to: Re: A-frame hoist posted by Stan [108.82.66.209] on Thursday, March 20, 2014 at 17:22:41 :
You could make a receiver tube, bolted to a piece of plate, drilled to bolt to the crossmember in place of the pintle. Then build a riser tube, shaped like an "L" with a hook or something on top of it to secure the guy cable. I think if you don't try to pick up too heavy of a load this would work fine. Build it so you can gusset or brace the inside of the "L".