Posted by Alex J [216.54.94.2] on Tuesday, March 04, 2014 at 14:22:56 :
In Reply to: could you pls post a pic posted by clueless [201.237.45.94] on Tuesday, March 04, 2014 at 13:48:48 :
Here ya go bud. I have a few more if you need another to help clarify.
Using GM 1 ton tie rod ends, (7/8-18 threads with a 7 degree taper on the stud). Drag link runs to a high steer arm on the passenger side, and then the tie rod runs fully across the front. Clears the diff cover at full lock which is nice because it requires no bends in the tie rod. All 3 pieces (draglink, tie rod, and trac-bar) are all 1.5" x 0.250" DOM tubing. Plenty plenty stout. The trac-bar was bent on a custom die that I made for getting it around the diff housing.
Follow Ups: