Posted by CSCameron [174.26.45.190] on Tuesday, March 04, 2014 at 08:05:13 :
In Reply to: Caliper problem posted by Nick [99.100.212.49] on Tuesday, March 04, 2014 at 00:09:50 :
Hey Nick,
I had a similar problem on the rears. One side (passenger) fit nice after removing the shims on the back. Driver's side fits much tighter, no play at all between the pads and rotor. However, mine did go on.
Inspect the caliper to see if the piston is fully retracted or as someone mentioned, slag or some defect stopping it from seating.
BTW, I tore into my front passenger side last night. Fun, messy, but no problems so far...
How did you remove the bronze axle bushing and seal?
Clark
Follow Ups: