Posted by Greg Coffin [64.24.133.28] on Saturday, February 08, 2014 at 16:21:21 :
In Reply to: Thinking about my clutch. posted by Tim Holloway [69.54.28.229] on Saturday, February 08, 2014 at 16:10:00 :
Check to see if the throw-out lever is moving. If you are getting about an inch of throw at the slave rod, that should be enough to disengage the clutch. If it's moving less than that, it's probably a hydraulic problem. If it's moving an inch, then it could very well be a sticking clutch disk.