Posted by Dozerman51 [108.235.117.172] on Monday, February 03, 2014 at 00:19:45 :
In Reply to: Re: Carter B&B float level & gasket posted by Howard [74.4.35.54] on Sunday, February 02, 2014 at 14:32:16 :
I Just rebuilt the Carter B&B D6A1 carb in my WC-12. I used the Standard motor products kit 101A. It had a good assortment of gaskets etc for the carb. I would completely take it apart and soak it in a carb parts cleaner solution. I bought 1 gallon solution with a with a bucket inside of it. Let the carb and parts soak for a day and then rinsed the parts in hot water. Then I towel dried and blew compressed air through every oriface and jet in the carb. Re-assembled using the above mentioned kit and the carb operates much better than it did before the rebuild.
Follow Ups: