Posted by scott 56 [24.130.235.145] on Friday, January 31, 2014 at 22:29:52 :
A few weeks ago I posted up that my axle was binding in the knuckle. I received several suggestions of where to look. I think I had two separate problems. The main cause was the inner axle bushing was not seated all the way in. I also noticed the outside flange had a step where the top and bottom halves were not a matched set. Rick in Novato CA came to the rescue and donated a set. Once the bushing was seated and the new set installed, all is well. It certainly is much easier once you've done it once. Thanks for all the help. On to the brakes and rear axles
Follow Ups: