Posted by scott 56 [24.130.235.145] on Tuesday, January 21, 2014 at 11:28:28 :
In Reply to: Re: after rebuild knuckle is binding posted by Paul (in NY) [12.64.158.55] on Tuesday, January 21, 2014 at 08:45:36 :
I did not take the right side apart while working the left side so I am positive that the halves did not get mixed. One thing I noticed when reassembling the two halves, the surface that the spindle mounts too had a slight step where the two due to the two halves. I thought this odd because the pins on each side do not allow for any adjustment.
Follow Ups: