Posted by Vaughn [99.104.70.109] on Wednesday, January 01, 2014 at 10:17:02 :
In Reply to: Remove or add shims? posted by Sterling [99.98.76.231] on Tuesday, December 31, 2013 at 20:29:32 :
These are the thickness of the shims:
.004 - 927368
.005 - 927369
.0125 - 927370
.015 - 930402
You'll need to mix and match shims to get the right amount of preload in inch pounds. If you need more shims, see your Dodge dealer, the part number is provided. The dealer will need to do a part locator to find any in inventory.
There is a spacer that goes between the bearing cones that should be installed first, then shims, and lastly the outter bearing cone.
If your torque wrench only goes to 120 foot pounds, use that setting when checking bearing preload.