Posted by Chriscase [107.194.26.159] on Monday, December 09, 2013 at 23:30:19 :
In Reply to: Piston ring end-gap, perhaps too large? posted by don in nh [96.61.72.163] on Monday, December 09, 2013 at 23:11:27 :
Piston to bore should be .0015, not .015? Double check your math/typos? .040 pistons should be 3.290, plus clearance = 3.292 ?
But .005 taper is within the just-ring-it range.
The huge end gap could mean wrong rings, if everything else adds up.
Follow Ups: