Posted by Tim Holloway [69.54.28.229] on Saturday, December 07, 2013 at 20:18:07 :
In Reply to: Pressure Treated Lumber? posted by CSCameron [174.26.77.215] on Saturday, December 07, 2013 at 11:01:45 :
I used it on my bed, I just drilled and bolted it to the crossmembers. No steel strips. I had no bed floor at all and what good is that? I have used it for coming on 15 years now and it has worked very well. No warping etc. The new PT as has been mentioned is way corrosive to steel, I would put a barrier layer between the wood and any crossmember or side channel, such as a rubber membrane flashing tape.
Not original looking, and I wouldnt do it on a show truck, but it worked fine for me!
Tim